The Miniserver should show up in the search results and you can connect to it by double clicking on it. Open Loxone Config and search for the Miniserver. The Miniserver status LEDs should be flashing green and the network socket LEDs should be green on and amber flashing. If the LEDs stay the same pleasecontact support.ġ.3 If both LEDs are on constantly, with or without a cable connected please contact support.Ģ. If this is all correct continue to step 2.ġ.2 If both or one LED is not flashing/not lit up then check first that the network cable is connected correctly and the cable has been tested or replaced. Verify that the status LEDs on the network (LAN) port of the flash or are lit up.ġ.1 The green LED should be lit constantly, the amber LED should flash. If the Miniserver is flashing green but you cannot connect to it in Loxone Config use the following table to resolve the issue: Stepġ. There is a faulty PLC program in the Miniserver. If the behaviour remains the same then format the SD card to factory defaults according to the instructions. Check that the SD card is inserted correctly.Ģ. Reboot the Miniserver and extensions (by turning the power supply off for about 10 seconds until rebooting). The green connector power plug should NOT be removed if the power supply is on.ģ. The Miniserver does not recognise the SD card or cannot access the card.ġ. If this is not the case refer to the following table for the solution: LED statusġ. Reboot the Miniserver and extensions (by turning the power supply off for about 10 seconds until rebooting). The green connector power plug should NOT be removed if the power supply is on.Ģ. After this process the status LED on the front of the Miniserver will be flashing green. The boot process takes about 7-10 seconds. Only power up the Miniserver once all wiring has been completed. Unpack your Miniserver from its box and connect the power supply as well as a network cable from the router to the Miniserver.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |